Archives for October 2018

Cleaning Up Unsanitary Water Damage

Carpet Cleaning

If your carpet has been damaged by unsanitary water, or if it’s been wet long enough to start growing mold, you should use the services of a professional water damage restoration firm.

Safety Precautions

Many of the safety precautions to observe when dealing with water damage caused by sewage are simple, common sense ones. To avoid infection, it is imperative not to come into direct contact with sewage, so it is essential you wear protective clothing during water clean up. Remember though, protective gear (disposable plastic gloves, goggles and face visors, leak-proof rubber boots, etc.) won’t do you any good if you absentmindedly rub your eyes, scratch your nose, pull at your ears or pop something into your mouth with your plastic-gloved hands or fingers while engrossed in water damage restoration of sewage-contaminated objects. If you have any cuts or sores on your hands or fingers, take extra precautions to cover them up, and apply antibiotic ointment after you have finished working.

Cleaning Up Sewage

Wash Your Hands

When it’s time to break for lunch after sewage water clean up,  slip off those plastic gloves and wash your hands with disinfectant before you grab that sandwich. You should wash your hands frequently, using the disinfectant every time. Hopefully, the water damage to your home (if it is your home) won’t have affected all the showers because you should be able to shower frequently using disinfectant soap, a nail brush, and clean towels.

Dispose of Contaminated Items

Some of the objects contaminated by sewage are salvageable and can be saved by water damage restoration processes. Others, particularly exposed food, objects made of porous material like stuffed toys, carpeting, upholstered furniture, all books and paper products, and all medical supplies, will have to be disposed of – and the sooner, the better.

Disinfect All Salvageable Items

Salvageable items that can be restored to pre-water damage condition must be disinfected.  Contaminated clothes must be washed in hot water and detergent. If the original cause of water damage was in your home, it’s best to use a Laundromat or to send your laundry out to be dry-cleaned.

Take Action Right Away

Sanitizing is the central part of water damage restoration of objects contaminated by sewage. The sanitization process to follow varies slightly according to the extent of contamination (length of time the sewage has been in contact with the contaminated areas/objects, the content of sewage and porosity of affected items). That’s why the first and most important safety precaution is to begin treatment as soon as possible. The longer sewage remains in the affected location, the more of a health risk it becomes. If you don’t react immediately, more of your belongings will be too contaminated by the sewage damage.

Some General Guidelines

Although it is best to get a professional assessment to determine which decontamination techniques are needed for each case, some general hygiene guidelines you should observe are listed below:

  • You don’t need to discard food in sealed metal cans. However, you should remove the labels, wash the cans in detergent and place them in a chlorine solution (bleach and water), then air dry.
  • Clean all affected walls and hard surfaces with hot water and detergent and disinfect with a chlorine solution. After water cleans up, let dry completely to guard against mold.
  • Toxic vapors develop when bleach is mixed with ammonia. So remember not to use ammonia cleansers on items or surfaces that you had previously disinfected with a chlorine solution.
  • You should use hand sanitizers – but don’t come near a source of flame after you’ve just done so.
  • Finally, as in all water damage situations, remember to immediately disconnect all electrical equipment (including battery back-ups).

Carpet Cleaning Tips and Tricks

Austin’s Small Business Owners

Large establishments and buildings owned by conglomerates or multinational corporations will have the funds and means to include professional cleaning services as part of their property maintenance budgets. However, for Austin’s smaller businesses owned by small corporations of entrepreneurs, getting the services of an Austin carpet cleaning contractor may blow their budget out of proportion. Property managers may opt to do their own maintenance services for their facilities including cleaning and maintenance work for their commercial carpets. Under this situation, property managers can employ these basic tips and tricks that even the professionals use.

Austin Commercial Carpet Cleaning

Every Job Has It Own Requirements

Property managers and their maintenance crew should consider that each cleaning job is different from the next. Although the primary cleaning method and procedures are there, some of the customized work to deal with one particular cleaning situation may not apply to another situation. What is important is that the maintenance crew has all the essential tools and cleaning chemicals available for any commercial carpet cleaning job that may be encountered with their carpets. These include detergents, rinsing agents, encapsulation chemicals, agitation tools, and oxygen boosters.

Regular Cleaning Is a Necessity

The basic cleaning process that should be done regularly for carpets is vacuum cleaning. Regular vacuuming can remove most soils and dirt from the surface and prevent accumulation that will result in difficulty in cleaning and removing later on. As much as possible, do not use liquid carpet shampoos for cleaning. Unless you entirely drench the carpet and extract all the water out, the shampoo cannot be completely rinsed out and removed. The result would be a sticky residual layer that can attract more dirt and dust from people. Dry carpet cleaners are preferable, and most are commercially available.

Cleaning Older Carpet

If the carpet is old and has accumulated a considerable layer of unrinsed shampoo, this can be cleaned, and the old shampoo removed using a shampoo machine. Property managers should invest in such machines for regular use, but if not available, certain units can be rented out. The machine cleans by mixing 1 cup of vinegar in 2½ gallons of warm water. The vinegar acts as an agent that pulls out the old shampoo off the fibers and cleans the carpet just as well. The results will be a soft carpet free of dirt and grime and shampoo residues.

Heavy Traffic Soiled Carpet

Carpets that are heavily soiled can still be cleaned using a pre-conditioner and a rotary brushing system. The key to cleaning using this method is agitation, and the brushes will allow the pre-conditioner to reach the embedded soil. Addition of oxygen boosters to the cleaning solution can dissolve smaller soil particles and can act as mild bleach that will remove the yellowing or graying in the fibers. It is preferred that the solution is warm or heated for better cleaning effect. However, there may be some limitations on the available equipment. Rinse the carpet with an encapsulation solution to prevent wicking of the fibers for better vacuuming later on. This will also keep the carpet soft. Another method of agitation cleaning is through the use of bonnet or pad cleaning machines. Used with a good cleaning agent solution, it can clean carpet fibers faster and more effectively.

Drying The Carpet

After cleaning and rinsing the carpet, the next important step is to perform carpet drying. Wet-dry vacuum cleaners would be an effective tool to remove excess moisture from the carpet. Remaining moisture can be air-dried using blowers, or if the area affected is big, use air movers.

If you are worried about computer viruses or ransomware this is the very best protection available. Buy Sophos Home Premium

The Benefits of Steel Roofing

Considering a New Roof?

Because the roof is such a vital part of your home, it is important you select the best roof possible. Your roof needs to be reliable and robust as well as reasonably priced. Steel roofing is one roofing material that will give you a top quality roof that will last for years. Experts say that steel roofing could last longer than many other types of roofing available today. It is durable, lightweight, and very reliable. On top of that, steel is a sustainable material and is suitable for all kinds of weather conditions. Because of its many advantages, steel roofing has about 80% in the roofing market in the USA. Because of all these positives, steel is becoming a favorite material for commercial roofing in Houston.

Steel is the Longterm Economic ChoiceSteel Roofing

Using lightweight steel, allows you to save money on structural support upgrades for your roof. Many builders prefer to use steel because it is so economical and efficient. If you are using steel roofing for your home, you may want to use pre-painted steel roofing. This type of roofing is coated at the factory to protect it from weather damage. Make sure you buy pre-painted steel roofing from a highly regarded company, as you can be sure that the product has passed through strict quality control tests. Coated steel roofing must reach a certain level of quality before they can be sold in the market. Steel roofing materials come with a warranty, and if the quality of the roofing doesn’t match the claims of the manufacturer, you can have it replaced within the warranty period. Most people, however, never encounter any problems with pre-painted steel roofing. This material can last for decades; with regular maintenance, a steel roof can last up to fifty years.

Environment-Friendly Steel Roofing

Because 25% of the steel used in roofs all over the country is recycled steel, these roofs are perfect for the environment. Many companies have environmental policies in place to reduce their impact on the planet. For example, they buy recycled materials from material recovery facilities all over the world. In the last several years the enormous demand for steel roofing has meant that around half the steel used in the US is recycled. Steel no longer goes straight to the landfill; it is recycled into new roofs. If you choose to install steel roofing in your home, not only will you get an excellent roof but you will also be helping the environment.

Dealing with Drywall Water Damage

Damage From Fire or Flood

After a fire or flood disaster, It may not be necessary to replace the entire panel. There are some basic guidelines to follow in restoring water-damaged drywall. You need to asses the degree of damage to see if you will need professional help to do the job. If the drywall is soaked in a flood or excess water, it has to be cleaned and dried within 24 hours; otherwise, it will become a breeding place for mold and mildew, not to mention other hazardous microorganisms.

Determining Drywall Water Damage Detection

The first thing you should establish is the degree of water damage to the drywall. You will recognize this through the stains in the affected areas, and the parts that are softened and could likely disintegrate. Given the fact of how much water is used to put out the fire, it is highly probable almost all parts of the drywall is damaged. In this situation, you will need to hire the services of a professional water damage restoration company because of the extensive repair work required. However, if only small parts are affected, and you have some basic knowledge about drywall, you could endeavor to do the restoration job yourself.

Development of Mold and Mildew if Water-Damaged Drywall

Water-soaked drywall panels should be thoroughly dried as soon as possible before mold and mildew can set in. If you see dark porous spots develop with that distinct mildew smell, then you need to start the mold remediation process, which is best done by a professional. A damp, moist and poorly ventilated environment is the perfect breeding place for mold and mildew.  Sometimes, the outer part of the drywall does not manifest the mold growth, but it could be that mold has started growing in the interior of the wall.  In this situation, the best choice is to hire the services of a professional mold remediation service.

How to Prevent Further Damaged to Water-Damaged Drywall

Whatever the extent of damage to your drywall, dehumidifiers, and water removing machines should be used to hasten the removal of excess water and the drying process. You can improve ventilation by using industrial electric fans and the opening of all the windows. If you do not own industrial grade electric fans, see if you can rent one. However, if the damage is widespread, then the job might be too big for a layman, and professional help is necessary.  Water damage restoration service companies have the expertise and the equipment to do the job efficiently and quickly. It would help if you took all the required steps to prevent further damage to the drywall by allowing mold and mildew development. You can entrust a professional mold remediation service to do the job with the best results because they have the training, they licensed for this job, and they have specialized equipment to do it without errors. They have the experience to assess what areas of the drywall are damaged and need repair. Your local mold remediation service can tell you more about drywall water damage.